Price range: €10.00 through €26.75
Traffic Film Remover (TFR) is a high-strength, concentrated pre-wash solution engineered to tackle the heavy road grime and oily films that standard foams often struggle to penetrate. Unlike traditional snow foams that rely on thick suds, TFR is a chemical-forward cleaner applied via a pressure sprayer for maximum surface contact. It is designed to rapidly dissolve stubborn environmental contaminants in as little as two to five minutes, making it the ultimate choice for deep-cleaning neglected vehicles or preparing paintwork for a full detailing session.
Heavy-Duty Cleaning: Formulated to break down the electrostatic bond of “Traffic Film”—the greasy layer of soot, oils, and minerals that standard washing cannot remove.
Rapid Action: Dissolves dirt significantly faster than snow foam, requiring only a 2–5 minute dwell time to be effective.
Pressure Sprayer Application: Applied as a fine mist, ensuring the chemical reaches directly into the pores of the dirt without being “buffered” by air bubbles.
Versatile Utility: Highly effective on both vehicle bodywork and alloy wheels, stripping away stubborn residues with ease.
Cost-Effective Concentrate: Highly dilutable (up to 1:10), allowing you to adjust the strength based on the severity of the contamination.
Type: Concentrated Alkaline Pre-Wash
Application Method: Pressure Sprayer (recommended) or Foam Lance
Dwell Time: 2–5 Minutes
Dilution Ratio: 1:3 (Heavy Soiling) to 1:10 (Maintenance)
Safe Surfaces: Paintwork, Rims, and Commercial vehicle chassis
Dilution: Mix the TFR in a pressure sprayer based on your needs. Use 1:3 for heavily neglected cars or 1:10 for lighter road film.
Application: Spray the solution directly onto the dry vehicle, starting from the bottom (where the dirt is heaviest) and working your way up.
Dwell: Allow the product to sit on the surface for 2–5 minutes.
Observation: Watch the dirt begin to “run” off the panels. Do not allow the product to dry on the paintwork.
Rinse: Thoroughly flush the entire vehicle with high-pressure water, ensuring all chemical residue is removed from gaps and seals.
